Welcome to Z-Community
It looks like you're new here. If you want to get involved, click one of these buttons!
Joined on: January 9, 2017
User's Score: 163
Axon 10 Pro
Blade A7 Prime
Blade MAX VIEW
Z-Community YouTube Channel Link
Don't bother getting this Screen protector. Doesn't provide full coverage.
[2 Pack] KATIAN Compatibe ZTE... https://www.amazon.com/dp/B07P1XNB1S?ref=ppx_pop_mob_ap_share
If you find an adequate protector, let us know!
I'm looking for one while wait for shipment to get here. I saw this on Amazon and stay away. It's hard to find real curve temper glass. I'm talking from experience since Samsung S7 edge. Either no adhesive or just on the side.
My recommendation is go with film tpu screen, wet or dry. Save you time and money.
I bought this setup from Ali Express. It took a couple weeks to get but well worth the wait. It is full coverage and easy to install. I have installed this type before which helps. It comes with UV glue and the light etc. There is no guide like you get with a Whitestone Dome but basically the same setup. There is a Install video on Ali for this. I can't get a picture of it installed on the phone because it covers so well and you can't see it in the photo. I ordered 4 tempered glasses in my order and it was $20. Hopefully Amazon will get this type on their site for Prime members. I hope this helps.
How's the finger reader?
Fingerprint reader is perfect. No issues at all.
yeah i ordered this too, such a lie way to short.
I'm going to give this a try.
Agreed that tempered glass screen protector is a lost cause. I'll go for the wet one
I ordered from here: https://www.protectionfilms24.com/c/ALL/zte-axon-10-pro/?count-pro-page=6&page=1&product-overview-sort=bestResult
I'll let everyone know how they are once I get them.
It sounds like a good product. I will be interested to here what you think about it. I am really happy with the tempered glass one I used. the coating is really good. It wipes off easy and feels just like the phone screen. It reminds me of the old days before curved screens. 😉
I tried this before on my other phone. It's practical for protection, but navigation isn't great. Like pressing on screen with air gap.
hearing this makes me sad. If that's the case I will most likely try again
Um, I think you did a poor job installing it. It should be moved up higher on the screen. You left all that space between the camera and the camera cutout! And you pulled the protector down toward the bottom of the screen covering the bottom bezel of the device. It should have been applied higher up.
I know how to install these. I'm no newbie. Think about your comment and how silly it is. If you move it up, don't you think the gap will just move to the bottom?
Forget the gap, the fact that the edges aren't adhered would cause me to throw it out immediately.
I agree, I tried one of those tempered glass protectors from Amazon. When it wouldn't stick around the edges I sent it back and bought one with the UV glue. I've used the UV glue type on several Samsung Galaxy devices and always had good luck.
Yeah. There's supposed to be a gap where the BEZEL is. The screen protector covers the SCREEN, not the bezel. But hey, it's your phone.
I think it's a stretch to say there is supposed to be a gap where the bezel is. For this particular screen protector perhaps that was the design, but I've used plenty of glass protectors over the years that cover the whole screen, including the bezels, including right now on my Pixel 3XL. A gap like that, even over the bezel, would be annoying and would be a fantastic place for large amounts of dust and junk to accumulate between the protector and the case.
This worked. Been using for couple days. It's not temper glass, but offer some protection. Finger scanner worked perfectly. If you're wondering why I post Huawei P30 Pro, because Axon 10 Pro and P30 is the same size and share the same notch. Don't bother looking for full adhesive glass. You basically need to do it manually with UV light.
Time to hunt for good case.
(3 Pack) Orzero Compatible for Huawei (P30 Pro) (Premium Quality) Edge to Edge (Case Friendly) Screen Protector, High Definition Anti-Scratch Bubble-Free (Lifetime Replacement Warranty) https://www.amazon.com/dp/B07N2MVBXF/ref=cm_sw_r_cp_apa_i_DUZFDbQRFABY8
Using a OnePlus 6T protector i had laying around and it covers the phone pretty good. i'd say among the best not even designed for this phone.
Putting this on later. Full body protector. Will most likely just put the back cover on and the front skin(wet)
Ughh. No one send me any junk mail!!! Could not figure out how to delete the image
Back skin applied. Redoing the front tonight. Nothing a little dish soap and reapply. I'll let the front cure overnight. Showing lots of signs of fingerprints. If that keeps up, this will have to come off. Would have preferred Red but not yet available. Back is case compatible, front still depends on a full cure. Wet Screen Protectors are sometimes tricky to get right the first time.
I'll post a new pic of the front after it fully cures. A hair dryer would help, but not in my possession ATM.
The Spigen screen protector was bad - lots of fingerprint/smudging. I'm giving this one a shot:
Will let ya all know how it fairs
If this is gorilla glass 5 why is a screen protector necessary? I took them off my axon 7 and never had an issue. Would it help cut down the excessive glare on the axon 10?
Gorilla glass 5 doesn't prevent scratches on the screen. Screen protector Just an extra layer of protection to preserve any resale/return issues. To each their own.
If there's one thing I've learned from watching JerryRigEverything's YouTube videos, it's that no matter what type of Gorilla Glass a phone is using, it always scratches at a level 6 with deeper grooves at a level 7 on Mohs scale of mineral hardness. So, keys and coins won't scratch the screen, but sand and other tiny debris that eventually accumulates in your pockets may produce micro scratches on the screen over time.